EUROCOM P150HM Guide de l'utilisateur télécharger pdf (Page 12)

RAID Setup (Model C Only) - 7

Concise User’s Guide

English

RAID Setup Procedure

Part I: BIOS

1. Start-up your computer and press F2 to

enter the BIOS.

2. Go to the Advanced menu, select

SATA Mode and press Enter.

3. Select RAID.

4. Press Esc and go to the Boot menu.

5. Set the CD/DVD-ROM Drive (make

sure the Microsoft Windows OS disc

is inserted) as the first device in the

boot order from the Boot menu.

6. Select Save Changes and Reset from

the Exit menu (or press F4) and press

Enter to exit the BIOS and reboot the

computer.

Part II: Intel Matrix

1. Press Ctrl + i to enter RAID configura-

tion menu.

Figure 2 - Intel(R) Matrix Storage

Manager Option ROM

2. Select 1.Create RAID Volume and

press Enter.

3. Type the RAID volume name and then

press Tab or Enter to advance to the

next field.

4. Specify (use the up and down arrow

keys) the RAID level (RAID 0, RAID 1

or

Recovery - see Table 2 on page 6)

and then press Tab or Enter to

advance to the next field.

5. Press Enter and the system will select

the physical disks to use.

6. Press Enter and select (if applicable)

the Strip Size (best set to default).

7. Press Enter and select the Capacity

size (best set to default).

8. Press Enter to select Create Volume.

9. Press Enter to create the volume, and

confirm the selection by pressing Y.

10. This will now return to the main menu.

Figure 3 - RAID Created

11. Select 6.Exit and press Enter, then

press Y to exit the RAID configuration

menu.

12. Press a key when you see the message

"Press any key to boot from CD".

13. Press Enter to continue installing the

operating system as normal (see your

Windows documentation if you need

help on installing the Windows OS).

P150HM-P170HM CUG Book.book Page 7 Tuesday, December 21, 2010 4:41 PM

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 184 185

Commentaires sur ces manuels

Pas de commentaire