Eurocom W870CU Cheetah Manuel d'utilisateur Page 171

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 290
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 170
Modules & Options
Setting Up SATA RAID or AHCI Modes 7 - 63
7
RAID Setup (Intel Matrix)
1. Press Ctrl + i to enter RAID configuration menu.
2. Select 1.Create RAID Volume and press Enter.
3. Type the RAID volume name and then press Tab or Enter to advance to the next
field.
4. Specify (use the up and down arrow keys) the RAID level (RAID 0 or RAID 1 see
Table 7 - 1, on page 7 - 61) and then press Tab or Enter to advance to the next
field.
5. Press Enter and the system will select the physical disks to use.
6. Press Enter and select (if applicable) the Strip Size (best set to default).
7. Press Enter and select the Capacity size (best set to default).
8. Press Enter to select Create Volume.
9. Press Enter to create the volume, and confirm the selection by pressing Y.
RAID Volumes:
None Defined
Physical Disks:
Port Drive Model Serial # Size Type/Status(Vol ID)
0 FUJITSU MHY2120B K404T812P22B 111.7GB Non-RAID Disk
1 FUJITSU MHY2120B K404T7C2KJ14 111.7GB Non-RAID Disk
Intel(R) Rapid Storage Technology - Option ROM - 9.5.0.1021
Copyright (C) 2003-09 Intel Corporation. All Rights Reserved.
[ MAIN MENU ]
[ DISK/VOLUME INFORMATION ]
[

]-Select [ESC]-Exit [ENTER]-Select Menu
1. Create RAID Volume 3. Recovery Volume Options
2. Delete RAID Volume 4. Acceleration Options
3. Reset Disks to Non-RAID 6. Exit
Figure 7 - 52
Intel(R) Matrix
Storage Manager
Option ROM
Vue de la page 170
1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 289 290

Commentaires sur ces manuels

Pas de commentaire